Hotchkis 1415 Chassis, Max Sway Bar Brace, 67-69 Camaro-Firebird F-Body - Manual (Page 6)

1967-1969 GM F Body
Hotchkis Performance LLC.
6
10R. Once you have the chassis brace in place, mark the spots where you will drill the holes
to secure the brace. Do this on both sides.
11R. Remove the chassis brace and using a 7/16” drill bit, drill the 4 holes that you just
marked.
12R. Place chassis brace back into place and mark the remaining 4 holes for drilling as shown
below. After marking the holes, remove brace and using a 7/16” drill bit, drill the holes.