Hotchkis 1415 Chassis, Max Sway Bar Brace, 67-69 Camaro-Firebird F-Body User Manual
Page 9
1967-1969 GM F Body
Hotchkis Performance LLC.
9
16R. Using the T1712 Hardware kit, take the longer (3”) bolts and attach the dog bone end
link
to the bar on the INSIDE of the bar. There are two different washer types included
in the bolt kit, use the large diameter washer up against the dog bone, and the small
one against the sway bar. Tighten the bolt to the point where you can just rotate the
end link on the bolt.
17R. Slide the other end of the dog bone style end link up in between the brackets on the
chassis brace. Check for exhaust clearance in this area. If necessary, you may have to
have the exhaust pipes re-bent to provide clearance for the new sway bar assembly.
Any competent exhaust shop can handle this modification easily. If clear, use the
shorter (2.75”) bolt with a small washer on each side of the bracket to complete the
assembly and fully tighten.