Double check hardware, Stiffness adjustment – Hotchkis 22833R VW MKV, MKVI Rear Sport Sway Bar User Manual
Page 10
Advertising
5R
Double Check Hardware
Make sure all hardware is fully tightened before driving the vehicle. You are done with the
installation. The vehicle does not require an alignment after this installation.
6F
Stiffness Adjustment
Your Hotchkis front bar has 3 adjustment holes, which allow the customer to change the sway
bar stiffness harder or softer. The hole closets to the end is the softest setting, while the hole
furthest from the end is the stiffest. The stiffness increase compared the stock bar is as
follows:
Soft Setting: 90% Stiffer than Stock
Medium Setting: 135% Stiffer than Stock
Stiff Setting: 200% Stiffer than Stock
Advertising
This manual is related to the following products: