Hotchkis 22833R VW MKV, MKVI Rear Sport Sway Bar - Manual (Page 9)

4R
Reinstall New Hotchkis Bar
Repeat steps 2R through 3R in reverse order. Your new Hotchkis bar uses new bushings and
brackets. The rear bushing has a Ø1-1/16” hole. Use the supplied silicon grease to lube the
inside surface of the bushings. Make sure to use thread lock compound on the subframe
bushing bracket bolts and the end link nuts. There is some slop in the brackets provided, so
you can raise the sway bar upward to clear the subframe edge under each bracket.