Hotchkis 80101-1 300C-Magnum Stage 1 TV S System - Manual (Page 7)

9) Detach the endlinks from the sway bar using 15mm wrench on the bolt side and 16mm wrench on the
nut side. Retain the hardware for reinstallation.
10)
Unfasten the 2 bolts securing the subframe mounts using a 15 wrench. Retain the bolts for
reinstallation. You may discard the stock bushing brackets.
11)
The bar should be free to come out. The only obstacle when removing the sway bar is the brake lines
may be in the way. If so, carefully push the bar around the brake lines.