Hotchkis 80101-1 300C-Magnum Stage 1 TV S System - Manual (Page 8)

12) Compare the stock bar to your new Hotchkis bar for orientation purposes. Lube the bushings with the
provided grease and place them onto the bar.
13)
Feed your new Hotchkis sway bar into the sway bar location in the same manner as removal. Make
sure the bar is oriented as shown in the picture. Place the provided bushings mounts over the bushings
and make sure the 90° zerk fittings are facing outboard. Fully tighten the stock bracket bolts.