Hotchkis 80101-1 300C-Magnum Stage 1 TV S System - Manual (Page 3)

6) Reinstall in the same manner as removal. Attach the endlinks to the sway bar. Do not tighten at this
time.
7)
Install the subframe mounts back onto the vehicle. Fully tighten all hardware at this time (including the
endlink bolts!)
You are now finished with the front sway bar installation! Make sure that all hardware is fully tightened before
driving the vehicle. Let’s move on to the rear sway bar installation.
INSTALLATION OF HOTCHKIS REAR SWAY BAR
Installation Note: Some V6 models were not originally equipped with rear sway bars from the factory. If
your vehicle does not have a factory rear bar, you will need to purchase the following items from the
dealership prior to installation of the rear sway bar. (Factory part numbers are subject to change)
Frame mount Bolts 6500399 Qty 4
Endlink 4766866AA Qty 2
Endlink Bolts 6102222AA Qty 2
Endlink Bolts 6102239AA Qty 2
Endlink Nuts 6104717AA Qty 4