Hotchkis 4010 Subframe Connectors, Mopar B-Body - Manual (Page 3)

4010 & 4011S/L
Hotchkis Performance LLC.
3
1. Raise Vehicle
It is best to install the subframe connectors at ride height. To do this properly, please use a 4-
Post lift or alignment rack. Disconnect the negative battery cable.
2. Prepare Subframe Pieces for Welding
Subframe pieces come fully powder coated so you will want to first prep them for the welding
process. Sand the ends that do not have the bolt connectors (front side).