Hotchkis 4010 Subframe Connectors, Mopar B-Body - Manual (Page 7)

4010 & 4011S/L
Hotchkis Performance LLC.
7
- Weld the bolt and washer to the subframe connectors. Disassemble the mock-up.
- Reinstall the leaf spring mount and continue with the subframe connector installation.
4. Connect Subframe
Slide the rear of the subframe connector onto the 4 bolts that you just removed the nuts from.
Once subframe is on, replace the nuts and snugly tighten, but not fully tighten.