Hotchkis 80033 TVS System,Big Block, 1974-1981 Firebird User Manual
Page 12
Advertising
2236 GM F-Body Stabilizer Bar Installation Instructions
Page 12 of 16
Insert the reinforcement plate with the 2 tubes welded to it into the frame rail. Use a vise
clamp to secure the plate onto the frame rail. Drill the outer wall of the frame rail with a ½”
drill bit. The reinforcement tubes will act as a guide for you to drill. So when you are finished,
you will have two ¾” holes on the inside of the frame rail and two ½” holes on the outer
sided of the frame rail.
Advertising