Hotchkis 80033 TVS System,Big Block, 1974-1981 Firebird User Manual
Page 18
Advertising
2236 GM F-Body Stabilizer Bar Installation Instructions
Page 18 of 16
Once the passenger side is completely mounted together, you can now figure out where the
other frame rail reinforcement plate goes on the driver side. Mock up the driver side dog bone
end link onto the sway bar and mark where the bottom hole should be. Again, use the
reinforcement plate as guide to mark the upper hole. Drill the holes in the same manner as
before.
You can remove the mounting tabs that are no longer in use.
Advertising