7r. clean area for welding – Hotchkis 2254F Sway Bars, Front, 70-74, Mopar E Body User Manual
Page 10
Advertising
7R. Clean Area for Welding
Raise the rear of the vehicle and remove the rear wheels. This will allow you go access the
outer section of the frame rails easier. Sand the paint off the frame rails near the outline of
the bracket.
Sand the frame triangle bracket in the sections showed below.
8R. Weld Triangle Bracket to the Reinforcement Bracket
C-Clamp the triangle frame bracket to the reinforcement bracket and rosette weld the 2 holes
you marked at the end of step 6R. Once the brackets are together, weld a bead along the
Advertising
This manual is related to the following products: