12f re-weld skid plate, 13f sway bar stiffness – Hotchkis 2254F Sway Bars, Front, 70-74, Mopar E Body User Manual
Page 5
Advertising
Install the new end links in the same fashion as the stock removal.
12F Re-Weld Skid Plate
Use a jack to push the skid plate back to it’s original position. Sand or grind down the area
near the cut. Disconnect the car battery and re-weld the plate.
13F Sway Bar Stiffness
This bar is 220% stiffer than stock.
Advertising
This manual is related to the following products: