Hotchkis 2268 Hardware pack for 59-64 Rear Sway Bar - Manual (Page 13)

13
» Install the ½”-20 x 4” bolt through the sway bar hole and dogbone end link as shown in
the picture. Lightly tighten hardware.
Hardware Order from Inboard to Outboard
1. Bolt (½”-20 x 4”)
2. Small Washer
3. Swaybar
4. 3 Spacers
5. Large Washer
6. Dogbone
7. Large Washer
8. Nylock Nut
» Install the Clevis Bracket onto the dogbone endlink. Lightly tighten.