Hotchkis 22110F Sway Bars, Front, 10-11 Camaro, Competition - Manual (Page 4)

6F Remove Stock Bar
Fish the stock bar towards the driver side until it’s completely out. If you need more clearance, carefully raise the
engine more until the bar can be removed.
7F Reinstall the Hotchkis Sway Bar
Reinstall the Hotchkis Sway Bar in the same manner as stock removal. Your kit comes with new bushings and
brackets. Apply the provided silicone grease in the inside area of each bushing. Install the bushings onto the bar.
When reinstalling the stock bushing bracket nuts, please use the provided washers from your hardware kit. You
should use one washer for each nut totaling 4 for the front installation. Apply a small amount of lock threading
compound (included in your kit) on each nut. Make sure to use the brackets that have the 90° grease fitting
attached. You may choose to point the fitting towards the outside or inside depending on which direction is easiest
for you to regrease in the future.