Hotchkis 1104 Tubular Lower A-Arms 64-72 GM A-Body User Manual
Page 11
Advertising
1104 64-72 GM A-Body/ 1108 70-81 GM F-Body
Hotchkis Performance LLC.
11
Once the bottom is popped in, line up the lower ball joint stud with the bottom of the
spindle. Continue to jack the a-arm up and insert the ball joint stud into the spindle.
Once the stud is in all the way, install the supplied castle nut. Fully tighten this nut and
install the new cotter pin. Once the castle nut is fully fastened, you may release the jack
and relieve the pressure on the a-arm.
Advertising