Hotchkis 1104 Tubular Lower A-Arms 64-72 GM A-Body - Manual (Page 9)

1104 64-72 GM A-Body/ 1108 70-81 GM F-Body
Hotchkis Performance LLC.
9
• 70-81 CHEVY CAMARO (1108)
Do not install the 1/4" spacer. Just install the lower spring Isolator onto the Hotchkis a-
arm. At this time, do not worry about the index clocking of the isolator. In some cases,
it is necessary to raise the driver or passenger side to getting uniform ride height. If you
need to raise the vehicle you can order 1/8” spacers (P/N#11990014) or the 1/4"
spacers (P/N#11980014) from Hotchkis directly. Your kit comes with two 1/4” spacers.
Possible Combinations:
No Spacer
= Same as Stock Arm (Default Setting)
1/8” Spacer = 1/4” Higher than Stock Arm
1/4” Spacer = 1/2” Higher than Stock Arm
1/4” + 1/8” Spacer = 3/4” Higher than Stock Arm
1/4” + 1/4” Spacer = 1” Higher than Stock Arm
15. Reinstall the Hotchkis A-Arm
Install the a-arm in the same manner as removal. Start with the inboard bolts to the
subframe. Fully tighten the inboard bolts at this time.