Hotchkis 2260 1968-1974 Nova Sport Sway Bar Set User Manual
Page 7
6F.
Using the included white silicon grease, lube the inside of the new 1 ¼” front bushings.
NOTE: the grease can be cleaned up with WD-40
7F.
Install the bushing on the new Hotchkis bar. Make sure the split on the bushing faces the front
when the bar is installed in the vehicle.
Look at the placement of the original
stock bushings on the stock bar for
guidance.
8F.
Place the greasable bracket over top
the bushing.
9F.
Put the new bar assembly into the
vehicle and start the frame bolts. Do
not tighten the frame bolts completely,
only start enough threads to hold the
bar in place while your work on the
endlinks
10F.
Install the new endlinks and tighten
them till the bushings are squeezed just enough that their diameter is just larger than the
supporting washer.
11F.
Tighten the frame bracket bolts.