Hotchkis 4012 Chassis, Subframe Connector, Set, 70-73 Camaro-Firebird F-Body - Manual (Page 3)

4012 70-73 Camaro / Firebird
Hotchkis Performance LLC.
3
1. Raise Vehicle
It is best to install the subframe connectors at ride height. To do this properly, please
use a 4-Post lift or alignment rack. Disconnect the negative battery cable.
2. Prepare Subframe Pieces for Welding
Subframe pieces come fully powder coated so you will want to first prep them for the
welding process. Sand the rear mounts of the subframe connector. Make sure you file
inside the rosette weld holes also.
3. Remove Screws
Remove the screws that hold the brake/fuel lines against the body
…