Hotchkis 4012 Chassis, Subframe Connector, Set, 70-73 Camaro-Firebird F-Body User Manual
Page 7
Advertising
4012 70-73 Camaro / Firebird
Hotchkis Performance LLC.
7
9. Paint and Replace Lines
After welds have cooled down, spray paint any areas exposing raw metal to protect
from rusting. Then put all lines back into place and tighten.
10. Drill Holes & Install Bolts
On the front end of the subframe connector, mark the center of each hole and drill a
hole through the frame. Use a ½” drill bit to get the hole in the frame to the same size
as the hole in the connector, big enough for the supplied bolts to fit. Install bolts and
fully tighten.
Advertising