Install frame rail reinforcements – Hotchkis 80016 TVS System, Stage 1, 70-81 Camaro, 70-73 Firebird GM F-Body, Big Block, 2" Drop User Manual
Page 10
Advertising
2236 GM F-Body Stabilizer Bar Installation Instructions
Page 10 of 16
9R
Install Frame Rail Reinforcements
We will be installing reinforcement plates onto the frame rails. This will require drilling two ¾”
holes for through each frame rail.
Start on the passenger side
frame rail. The hole that was used to hole the line tab is in the
same position as one of your holes. (see picture) Use one of the reinforcement plates as a
template to mark out the other hole.
Advertising