Rear bar installation – Hotchkis 80016 TVS System, Stage 1, 70-81 Camaro, 70-73 Firebird GM F-Body, Big Block, 2" Drop User Manual
Page 5
Advertising
2236 GM F-Body Stabilizer Bar Installation Instructions
Page 5 of 16
Rear Bar Installation:
1R. Jack up the vehicle and properly support with jack stands or lift jacks. Make sure the rear end
is supported with the vehicle’s load on the leaf springs. This is to ensure you install the rear
bar in the proper position.
2R. Take the bushings and grease the inner surface with the included white silicon grease.
3R. Install the bushings on the bar. (5) Place the bracket over top of the bushing. (6)
Advertising