Hotchkis 80013 1968 - 1974 Nova TVS System Small Block User Manual
This installation will require drilling, New mounting holes in the body
68-74 GM X-BODY / NOVA, APOLLO, OMEGA, VENTURA
2260R REAR SPORT SWAY BAR
Thank you for your purchase from our line of classic Chevrolet suspension products.
Please call us at 1-877-4NO-ROLL if you have any questions regarding the service and installation
of your Hotchkis Performance product. Visit us online @
This installation will require drilling
new mounting holes in the body.
Please read
the instructions carefully to avoid unnecessary drilling
.
INSTALLATION OF HOTCHKIS PERFORMANCE REAR SWAY BAR
1)
Securely block the front wheels of the vehicle.
2)
Remove the rear seat cushion. If the cushion won’t pull up easily, then use a long screwdriver to
push and release the small bar that is clipped in the bracket. Remove the bolts holding the back
part of the seat to the body and lift the cushion upwards to remove it.
Document Outline
- 2260
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U0TUwww.hotchkis.netU0TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?
- 2407C
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?