Hotchkis 80013 1968 - 1974 Nova TVS System Small Block - Manual (Page 3)

7) Use the shorter length bolts (2-3/4”) from hardware kit #T1712 to attach the triangular bracket
to the end links. The larger end of the bracket should be closer to the ground when installed.
Loosely start the hardware so that the assembly can rotate freely.
8) Take a screwdriver and carefully pry the brake lines loose from the clips on each end of the
axle. With the brake lines moved out of the way, drop the u-bolts included with hardware kit
#T1722 over the top of the axle.
9) Lift the bar assembly into place under the rear of the car with the arms of the bar pointing
forward. Use the axle mount brackets provided to hang the sway bar loosely from the axle. Slide
the u-bolts as necessary to center the sway bar on the axle.