Hotchkis 4007 Chassis, Subframe Connector Set, Coupe, 67-69 Camaro-Firebird F-Body - Manual (Page 2)

4007/4008/4009 67-69 Camaro/Firebird
Hotchkis Performance LLC.
2
4007 (Coupe) / 4008 (Convertible)
Subframe Connectors 67-69 Camaro/Firebird
4009
Subframe Connectors 68-74 NOVA
Thank you for your purchase from our new line of F-Body parts.
Please call us at (877) 4NO - ROLL if you have any questions
regarding the service or installation of your Hotchkis products.
Installation pictures were done on a Camaro. Nova installation is the same.
Subframe Connectors
Your new subframe connectors will increase the overall rigidity of your chassis and
improve handling and response. These engineered components connect the rear frame
rails with the front subframe to simulate a complete full frame chassis.
:
Notes
The subframe connector is essentially a Weld-In component, effectively connecting
itself to the front subframe and rear frame rails. However, you may choose to
bolt-in the front connection to allow front subframe removal if need be. Hardware for
the bolt-in procedure is included.
:
Before You Start
The installation of these subframe connectors will require you to grind and weld. It is
recommended that a trained professional install this product. Always wear eye
protection when grinding or welding.
:
Please read the entire manual before starting. All
images will depict the driver side installation.