Hotchkis 4007 Chassis, Subframe Connector Set, Coupe, 67-69 Camaro-Firebird F-Body User Manual
Page 6
Advertising
4007/4008/4009 67-69 Camaro/Firebird
Hotchkis Performance LLC.
6
The inboard Tab will need to be bent inward for a tight fit. Do this by using large
channel locks and squeeze the tab in. Don’t worry if there’s a little gap near the
bottom. You can fill the gap during welding. Leaf Spring Bracket will need to be
detached. See next step.
4. Prepare mounting points for welding/bolting
Remove the connector and start grinding/sanding the paint and grime off of the
vehicle’s frame rail. Unbolt the leaf spring bracket & lower shock mount and raise the
vehicle to access the outboard tab area for grinding. You will have to move the brake
and fuel line out of the way. Remove any tube clamps necessary to achieve this.
Advertising