Hotchkis 80117 TVS System, Stage 3, 10-11 Camaro, Race Pack User Manual
Page 13
Advertising
2010 Chevy Camaro
Hotchkis Performance LLC.
8
11.
With the strut brace in place you can now mark the front holes with a marker. Mark
the center of the front bracket slot on each side. Remove the strut brace from the
vehicle.
12. Drill the front holes in the same manner as the rear holes. Start with a 1/16” or 1/8”
pilot hole and finish it off with a 3/8” hole. These holes can be drilled from the engine
bay side.
Advertising