Rear end link installation – Hotchkis 80117 TVS System, Stage 3, 10-11 Camaro, Race Pack User Manual
Page 28
Advertising
2010 Chevy Camaro
Hotchkis Performance LLC.
3
REAR END LINK INSTALLATION
1. Raise the rear end of the vehicle to access the underside. You do not need to remove the wheels. If you
have drive-on floor ramps the installation will be easier.
2. Disconnect the OE end link from the sway bar ends. Retain the nut for reinstallation.
3. Disconnect the OE end link from the front struts. Retain the nut for reinstallation.
4. As a default setting, set the length of the Hotchkis links to the same length as the OE links. Tighten the
jam nuts once the length is set.
Advertising