Hotchkis 22412 04-07 Scion xA-xB Sport Sway Bars - Manual (Page 4)

INSTALLATION OF HOTCHKIS REAR SWAY BAR
1) Securely block the front wheels of the vehicle. Jack up the vehicle and support it with
jack stands.
2)
Locate the two holes on the bottom of the rear axle, right by the lower shock mount.
3)
Insert the bolts from the 1742 hardware kit inside the axle tube till they drop into the
holes.
4)
Carefully, move the Hotchkis bar over the bolts and start the nuts to keep the bar from
falling down. Tighten these bolts to 45 ft-lbs using a 14mm wrench and socket.
5) After initial driving, please check the tightness of all hardware.