MSD 2960 Atomic LS7 Master Kit Installation - Manual (Page 21)

INSTALLATION INSTRUCTIONS 21
M S D
• W W W . A T O M I C E F I . C O M • ( 9 1 5 ) 8 5 5 - 7 1 2 3 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
CLEAR FLOOD
If a flood condition occurs, turn the key on then press the accelerator to wide-open throttle. This tells
the ECU to turn off the injectors. Crank the engine to clear the flood condition until the engine starts
(release the throttle).
Note: The TPS is self calibrating so the key must be in the ON position prior to pressing the accelerator.