MSD 2960 Atomic LS7 Master Kit Installation - Manual (Page 7)

INSTALLATION INSTRUCTIONS 7
M S D
• W W W . A T O M I C E F I . C O M • ( 9 1 5 ) 8 5 5 - 7 1 2 3 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
Throttle Position (TPS) Sensor: The kit has a connector on each rail for the TPS sensor. It must be
plugged into the driver side rail. The kit only supports a cable driven throttle body at this time
and includes an adapter harness for the TPS sensor used on a cable driven throttle body.
Wide Band O2 Sensor: A wide band O2 sensor is supplied with the kit. The O2 sensor is used by
the ECU to monitor air/fuel ratios (AFR) in the exhaust gases. Adjustments are made by the
ECU in closed loop to maintain (AFR).