Type approved balance – Ohaus AS Series Electronic Balances User Manual
Page 23

23
Type Approved Balance
Type Approved Balance
Type Approved Balance
Type Approved Balance
Type Approved Balance
This parameter can be set to ON or OFF.
Selecting ON automatically sets certain
parameters for type approved require-
ments.
1.
Access the LFT submenu.
2.
The display will show the current
status (ON/OFF). If ON is selected,
Auto-Zero Tracking will be limited to
0.5d or OFF and Lock switch default
becomes Setup.
3.
Press
to change the status.
4.
Press
to accept the status.
5.
When
is released, the display
will show LFT.
To access a submenu:
1.
Repeatedly press
until the
desired submenu is displayed.
2.
Press
to select the displayed
submenu.
NOTE
NOTE
NOTE
NOTE
NOTE: You must use END to store any
changes you make to the Setup menu.
The following sections describe each item
on the Setup menu in detail.