Ohaus AS Series Electronic Balances - Manual (Page 5)

5
INTRODUCTION
This manual covers installation, operation and troubleshooting for the Ohaus
Analytical Standard balances, Models AS60, AS120, AS200 and AS260D. Type
approved Analytical Standard balances, Models AS60E, AS120E and AS200E are
setup to conform to OIML, EC and U.S. regulations. To insure proper operation of the
balance, please read this manual completely.
DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION
Ohaus Analytical Standard series balances are precision weighing instruments,
designed to provide years of service with virtually no maintenance. The Analytical
Standard series is constructed using a die-cast aluminum base finished with a durable
epoxy powder paint which is resistant to commonly used acids, contains a one piece
solid-state precision electronics PC board and a seven digit LCD display which is 0.6
inches in height. All Analytical Standard series electronic balances are factory set to
measure in grams. To prevent measurements from being affected by air currents, a
draft shield is mounted to the balance. A stainless-steel spill ring is removable for
cleaning in the event of accidental spills. Power is supplied through an AC Adapter
which is available in five configurations for world-wide usage. Accessories include: an
RS232 interface kit which allows printing of results through an external computer, an
RS232 interface cable with a print switch, a security device and calibration weights.
ANALYTICAL STANDARD Balance