Parity, Stop bits – Ohaus AS Series Electronic Balances User Manual
Page 79
10
2.
Press
to change the setting.
Press
to accept the displayed
setting.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE: If all selections do not appear, total
number of data, parity and stop bits is
currently < 8 or > 10. Data or stop bits must
be changed.
When
is released, PARITY will be
displayed again and the Print menu will be
returned.
Stop Bits
Stop Bits
Stop Bits
Stop Bits
Stop Bits
The number of stop bits can be set to 1 or
2 as follows:
1.
Access the Stop submenu to display
the current setting.
2.
Press
to change the setting.
3.
Press
to accept the displayed
setting.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE: If all selections do not appear, total
number of data, parity and stop bits is
currently < 8 or > 10. Data or parity bits
must be changed.
When
is released, STOP will be
displayed again and the Print menu will be
returned.
Parity
Parity
Parity
Parity
Parity
Parity can be set to Odd, Even, None, or a
marker of 0 or 1 as follows:
1.
Access the Parity submenu to display
the current setting.
MODE
MODE
MODE
MODE
MODE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
MODE
MODE
MODE
MODE
MODE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE