Ohaus AS Series Electronic Balances - Manual (Page 76)

7
PRINT MENU PRINT MENU PRINT MENU PRINT MENU PRINT MENU
When the interface is installed, the Print menu is used to configure the RS232 interface
parameters and customize the balance’s print functions for your requirements. The
following table shows the sequence in which submenus appear on the Print menu.
PRINT MENU TABLE PRINT MENU TABLE PRINT MENU TABLE PRINT MENU TABLE PRINT MENU TABLE
Sets all submenus below to original factory
default settings.
Specifies baud rate.
Specifies number of data bits.
Specifies parity type, if any.
Specifies number of stop bits.
Enables/disables Auto print feature.
Enables/disables printing stable-data-only
feature.
Specifies numeric-only or full display data
for output.
Used to exit the Print menu and store your
selections.
* Does not appear in menu if menu is locked out.
Print Menu Protection Print Menu Protection Print Menu Protection Print Menu Protection Print Menu Protection
The Print menu may be locked out to
prevent unauthorized personnel from
changing settings. To lock out the print
menu, refer to the section titled Menu
Lock-Out-Protection.
To access the Print menu press and hold
until PRINT is displayed, then re-
lease it.
If SAFE is displayed, the Print menu has
been locked-out. Settings may be viewed
but not changed. See the Menu Lock-Out
Protection section to enable it for making
changes.
*
ON ON ON ON ON
TARE TARE TARE TARE TARE