Reset to factory defaults – Ohaus AS Series Electronic Balances User Manual
Page 77

8
Reset to Factory Defaults
Reset to Factory Defaults
Reset to Factory Defaults
Reset to Factory Defaults
Reset to Factory Defaults
This submenu enables you to reset all
RS232 menu selections to the original
factory default settings outlined in the ad-
jacent table.
To reset to factory defaults:
1.
Access the Reset submenu to view
the current setting.
2.
Press
to change the setting.
(Select YES to reset settings or,
NO to leave current settings.)
Press
to accept the displayed
setting.
To access a submenu:
1.
Repeatedly press
until the de-
sired submenu is displayed.
2.
Press
to select the displayed
submenu.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE: You must use END to store any
changes you make to the Print menu.
The following sections describe each item
on the Print menu in detail.
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
OFF
OFF
OFF
OFF
OFF
MODE
MODE
MODE
MODE
MODE
PRINT MENU
PRINT MENU
PRINT MENU
PRINT MENU
PRINT MENU
FACTORY DEFAULTS
FACTORY DEFAULTS
FACTORY DEFAULTS
FACTORY DEFAULTS
FACTORY DEFAULTS
Baud rate
br 2400
Data Bits
7 data
Parity
None
Stop Bits
2 stop
Auto Print
OFF
Stable Data Only
OFF
Numeric Data Only
OFF
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
OFF
OFF
OFF
OFF
OFF
MODE
MODE
MODE
MODE
MODE