Ohaus C 305 ELECTRONIC BALANCE - Manual (Page 37)

11
Linearity Calibration Linearity Calibration Linearity Calibration Linearity Calibration Linearity Calibration
To start LINEARITY LINEARITY LINEARITY LINEARITY LINEARITY calibration, the BAL-
ANCE MUST BE OFF OFF OFF OFF OFF.
NOTE NOTE NOTE NOTE NOTE: DO NOT REMOVE CALIBRA-
TION WEIGHT(S) UNTIL WEIGHT VAL-
UE IS DISPLAYED AND UNIT INDICA-
TOR APPEARS.
1. Press and hold , release
when CAL is displayed.
2. When is released, C 0 will
be displayed indicating that no
weight should be on the platform.
3. Press . The display will
show -C- momentarily, followed by
the value of the weight which must
be placed on the platform.
4. Place the required weight on the
platform, then press . The
display will show -C- momentarily,
followed by the next weight to be
placed on the platform.
NOTE: Display values
shown are for the Model
C305.
NOTE: NOTE: NOTE: NOTE: NOTE: DO NOT disturb the bal-
ance when -C- is displayed. Distur-
bances will result in improper cali-
bration.
5. Place the required weight on the
platform, then press . The
display will show -C- while the bal-
ance recalibrates.
6. When the weight on the platform is
displayed along with the current unit
indicator (g or oz), the balance is