QNAP Security NVR-101 (Version: 2.8.0) - Manual (Page 20)

2.2 System Configuration
After server is turn on and ready, please insert the product CD to the CD-ROM drive
of your computer and follow the steps below to complete system configuration:
z Install Finder to search for NVR in the network
z Configure NVR by Finder
z Connect to the configured NVR and install ActiveX
After that, you can check if the server is working properly by the web interface.
1. Install Finder
Execute the product CD, the following menu will be shown. Select “Install
Finder”.
20