QNAP Security NVR-101 (Version: 2.8.0) - Manual (Page 73)

5.7.3 Hardware Settings
You can enable or disable the hardware functions of the server.
z Enable configuration reset switch
By enabling this option, you can press the reset button for 5 seconds to reset
the administrator password and system settings to default.
Note: The configuration reset switch is enabled by default. When this option
is disabled, please make sure you have kept your password safely. Otherwise,
the server cannot be reset anymore if the password is lost.
z Enable hard disk standby mode
When this function is enabled, hard disk will go to standby mode if there is no
access within the specified period.
z Auto power on when power resumes after power loss
When this function is enabled, the server will turn on automatically when the
power resumes after power loss.
73