QNAP Security NVR-101 (Version: 2.8.0) - Manual (Page 68)

5.6.4 Alarm Settings
You can enable alarm recording of the cameras. Recording will be triggered by
alarm input of the camera or motion detected by the camera.
When you enable the option “Activate alarm recording only on selected schedule”,
alarm recording will be activated only when alarm input is triggered or motion is
detected within the preset schedule. You could test the camera setting by clicking
Test. Click Apply to add the setting for the camera or click Apply to all cameras
to apply to setting to all cameras.
Note: All the settings will not take effect until you click the Apply button. When
applying changes, recording operation will stop for a while (maximum 1 minute) and
then restart.
68