QNAP Security NVR-101 (Version: 2.8.0) - Manual (Page 65)

5.6 Camera Settings
You can configure network camera, recording, schedule, alarm, and advanced
settings.
5.6.1 Camera Configuration
Please follow the steps below to configure the network cameras.
1. Select a camera number (1, 2, 3, and 4).
2. Select a camera model.
3. Enter the camera name.
4. Enter the IP address or domain name of the camera.
5. Enter the user name and password to login the camera.
6. Enable recording on the camera.
7. Click Apply to save the settings.
Note:
1. For detailed supported camera list, please refer to
Appendix E .
2. All the settings will not take effect until you click Apply button. When
applying changes, recording operation will stop for a while (maximum 1 minute)
and then restart.
65