QNAP Security NVR-101 (Version: 2.8.0) - Manual (Page 76)

5.7.5 Backup/ Restore/ Reset Settings
z To backup all settings, including user accounts, server name and network
configuration etc., click Backup and select to open or save the setting file.
z To restore all settings, click Browse… to select a previously saved setting file
and click Restore to confirm.
z To reset all settings to default, click Reset. All data on the disk(s) will be
deleted.
5.7.6 E-map
You can upload an E-map to NVR to illustrate the location of the cameras.
1. To upload an E-map, click Browse… and select the E-map file. Then click
Upload.
2. You can change the caption for the E-map and click Apply.
3. After uploading the E-map, click Test to view the map.
76