QNAP Security NVR-101 (Version: 2.8.0) User Manual
Page 84
11. I cannot use the SMB, FTP, and Web File Manager of NVR.
A. Please go to Network Settings-File Services page and check if these three
functions are enabled.
B. When NVR is installed behind a router and the access to NVR is outside the
router, you will not be able to use SMB and FTP services. Please refer
to
for details.
12. The server takes too long to restart.
When the server has been restarting for more than 5 minutes, please turn off
the power and turn on the server again. If the problem persists, please
contact the technical support.
13. How to enlarge my storage capacity by eSATA in NVR-101?
Warning: After the following setting, your original disk would be formatted. To
backup current video recordings, please refer to
for front video
backup button details.
A. Connect an eSATA disk to the eSATA port.
B. Go to Device Configuration in system administration page.
C. You can create the following disk volumes: RAID 1 Mirroring Disk Volume,
RAID 0 Striping Disk Volume or Linear Disk Volume.
Note: Your eSATA disk will be shown as drive 2.
84