QNAP Security NVR-101 (Version: 2.8.0) - Manual (Page 31)

Playback:
Enter recording playback page. The administrator
can assign user’s right to access this page.
Event Notification:
When the alarm recording is enabled and an event is
detected, this icon will be shown instantly. Click this
icon to view the alert details.
Snapshot:
Take a snapshot on the selected camera. When the
picture is shown, right click the picture to save it to the
computer.
Manual recording:
Enable or disable manual recording on the selected
camera. Administrator can enable or disable this
option in system configuration page.
(Option) Audio:
Turn on/ off audio support for monitoring page.
Login network camera homepage:
Select a camera and click this button to go to the
homepage of the selected camera.
Digital zoom
Select a camera and click this button to enable the
digital zoom function of the camera. (You can also
right click the monitoring channel to enable this
function.)
Press and hold the left mouse button to zoom in or
press and hold the right mouse button to zoom out.
You can press the left mouse button to drag the
viewing angle of the camera.
You can also use the mouse wheel or the PTZ control
panel to use the digital zoom function.
Select PTZ camera preset positions:
You can view different preset positions of the camera
by clicking the number buttons. To configure the
preset positions of the camera, please refer to the user
manual of the camera.
31