VTech CS6649_-2-3 Manual - Manual (Page 21)

17
Telephone settings
Key tone
You can turn the key tone on or off for each handset and the telephone base.
If you turn the key tone on, the handset/telephone base beeps with each key press.
If you turn the key tone off, there are no beeps when you press the handset/telephone
base keys.
Press MENU when the handset/telephone base is not in use.
Press or to scroll to Settings, then press SELECT.
Press or to scroll to Key tone, then press SELECT.
Press or to select Key tone:On or Key tone:Off.
Press SELECT to save your selection and return to the previous
menu. You hear a confirmation tone.
Home area code
If you dial your local calls using only seven digits (area code not required), you can
program your home area code so that when you receive a call within your local area,
the telephone number is automatically stored without the area code in the caller ID log.
Press MENU when the handset/telephone base is not in use.
Press or to scroll to Settings, then press SELECT.
Press or to scroll to Home area code, then press SELECT.
Use the dialing keys to enter a three-digit home area code.
Press DELETE on the handset to delete a digit.
Press and hold DELETE on the handset to delete all digits.
Press X/DELETE on the telephone base to delete all digits.
Press SELECT to save your selection and return to the previous
menu. You hear a confirmation tone.
If, in the future, your telephone service provider requires you to dial the area code when
making a local call, or, if you move to a location that requires it, follow the steps above
to delete the home area code you have already programmed. After you have deleted
the home area code, _ _ _ will appear on the screen.
1.
2.
3.
4.
5.
1.
2.
3.
4.
•
•
5.
Key tone:On
ECO
Key tone
ECO
ECO
_ _ _
Home area code
Home area code
ECO