VTech CS6649_-2-3 Manual - Manual (Page 63)

59
Screen messages
Ans sys off The answering system is turned off and will not
answer calls.
Ans sys on The answering system is turned on and will answer calls.
Base is calling The telephone base is calling the handset.
Call log empty There are no caller ID log entries.
Calling base The handset is calling the base (for intercom calls).
The handset is transferring an outside call to the base.
Calling HS X The handset/telephone base is calling another handset (for
intercom calls).
The handset/telephone base is transferring an outside call
to another handset.
Check AC power The corded handset is in use while the telephone base is in
line power mode.
Contact deleted A directory entry is deleted.
Directory empty There are no directory entries.
Directory full The directory is full. You cannot save any new entries
unless you delete some current entries.
Ended You have just ended a call.
Failed The handset registration is not successful.
HS X is calling Another system handset is calling (for intercom calls).
Incoming call There is a call coming in.
Intercom The system device is on an intercom call.
Intercom ended The intercom call has just ended.
Intercom to You have started the intercom process, and need to enter
the device number you wish to call.
Line in use An extension phone, or one of the handsets is in use.
Low battery The handset battery needs to be recharged.
Microphone on The mute function is turned off and the other party can
hear you.
Muted The microphone is off. The other party cannot hear you but
you can hear them.
New voicemail There are new voicemail messages from your telephone
service provider.
Appendix