Telephone installation, Telephone base and handset charger, Installation – VTech CS6649_-2-3 Manual User Manual

Page 6: Getting started, Telephone base and handset charger installation

Advertising
background image

Getting started

2

Telephone base and handset charger installation

Install the telephone base and handset charger(s) as shown below.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service through

your telephone line, you must install a DSL filter between the telephone line cord and

the telephone wall jack. The filter prevents noise and caller ID problems caused by

DSL interference. Contact your DSL service provider for more information about

DSL filters.

This telephone provides minimal functionality during a power outage. When the AC

power is not available, many telephone features do not function. The telephone uses

power from the telephone line to enable you to make and answer calls using only the

corded handset and dialing keys. However, when another telephone on the same line is

being used simultaneously, there might not be sufficient power to use your telephone in

the event of a power failure.

Telephone

line cord

If you have DSL

high-speed Internet

service, a DSL filter

(not included) is

required.
The DSL filter must

be plugged into the

telephone wall jack.

Telephone base

power adapter

Telephone base

Handset charger

Electrical outlet not

controlled by a wall

switch

Charger

adapter

Telephone

wall jack

Advertising