Appendix, Troubleshooting – VTech CS6649_-2-3 Manual User Manual

Page 72

Advertising
background image

Appendix

68

Troubleshooting

The layout of your home or office might be limiting the operating range. Try moving the

telephone base to another location, preferably to a higher location.
If other phones in your home are having the same problem, contact your telephone service

provider (charges may apply).
Test a working phone at the phone jack. If another phone has the same problem, contact

your telephone service provider (charges may apply).
Other electronic products such as HAM radios and other DECT phones can cause

interference with your cordless phone. Try installing your phone as far away as possible

from these types of electronic devices.
Remove and install the battery again. Place the cordless handset in the handset charger.

Wait for the cordless handset to reestablish its connection with the telephone base. Allow up

to one minute for this to take place.
Your line cord may be defective. Try installing a new line cord.

My calls cut in and out while I’m using my cordless handset.

Other electronic products such as HAM radios and other DECT phones can cause

interference with your cordless phone. Try installing your phone as far away as possible

from these types of electronic devices.
Do not install this phone near a microwave oven or on the same electrical outlet. You may

experience decreased performance while the microwave oven is operating.
If you plug your phone in with a modem or surge protector, plug the phone (or modem/surge

protector) into a different location. If this does not solve the problem, relocate your phone or

modem farther apart from one another, or use a different surge protector.
Relocate your telephone base to a higher location. The phone may have better reception

when installed in a high area.
If other phones in your home are having the same problem, contact your telephone service

provider (charges may apply).

The CHARGE light is off.

Make sure you plug the power and line cords in correctly and securely.
Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute

for the cordless handset and telephone base to reset.
Clean the charging contacts on the handset and the handset charger each month with a

pencil eraser or cloth.


Advertising