Velleman DVR4MQAE User Manual
Page 15
DVR4MQAE
- 15 -
VELLEMAN
i.
Advance Menu: ALERT
Move the cursor to the “ALERT” and press
”ENTER”. The screen will show the following
options:
1.
EXT. ALERT:
Set the sound on / off when external alarm is triggered.
2.
INT. BUZZER:
Set the sound of KEY / VLOSS / MOTION / ALARM / HDD FULL on or off.
3.
KEY BUZZER:
Set the sound on / off.
4.
VLOSS BUZZER:
Set the sound on / off.
5.
MOTION BUZZER:
Set the sound on / off when motion alarm is triggered.
6.
ALARM BUZZER:
Set the sound on / off when internal alarm is triggered.
7.
HDD BUZZER:
Set the sound on / off when the HDD is full.
8.
HDD NEARLYFULL (GB):
If HDD buzzer is on, you can choose to have a buzzer notification when the HDD available capacity has only xxx
GB left.
9.
ALARM DURATION (SEC):
Press “ENTER” or “＋” or “－” button to set the duration time of alarm recording (5, 10, 20, 40 sec.).
10.
PRE-ALARM:
Set the pre-alarm function on (8MB) / off.
When pre-alarm and event record functions are activated, the DVR will record 8MB file before alarm / motion
triggered.
j.
Advance Menu: REMOTE
Move the cursor to “REMOTE” and press ”ENTER”. The screen will show the following options:
1.
TITLE:
Title for each camera.
2.
DEVICE:
Select to control normal camera or PTZ camera for each channel.
ALERT
EXT. ALERT
ON
INT. BUZZER
ON
KEY BUZZER
ON
VLOSS BUZZER
ON
MOTION BUZZER
ON
ALARM BUZZER
ON
HDD BUZZER
ON
HDD NEALY FULL (GB)
05
ALARM DURATION (SEC)
05
PRE-ALARM
ON
REMOTE
TITLE
DEVICE
ID
PROTOCOL
RATE
01
PTZ
001
P – D
02400
02
CAMERA
002
NORMAL
02400
03
CAMERA
003
NORMAL
02400
04
CAMERA
004
NORMAL
02400
PRE
NEXT