Velleman DVR4MQAE - Manual (Page 3)

DVR4MQAE - 3 - VELLEMAN
5. Description
a. Front Panel
1. HDD Cartridge Lock
Lock or unlock the cartridge of the HDD.
2. USB
Supports firmware update and files backup.
3. LED Light
HDD: HDD is reading and recording.
HDD Full: HDD is full.
ALARM: The alarm is triggered.
TIMER: Timer recording is activated.
PLAY: Playing.
REC: Recording.
4. MENU
Press this button to enter the main menu and enter the default password “0000”. Press ENTER to confirm your
password.
5. ENTER / SET
Press ENTER to confirm.
Press SET to change the channel display position.
Press ▲▼◄► to select the channel you would like to change.
Press + or – to select the channel you would like to change.
Press ENTER to confirm.
Press MENU to quit.
6. SEARCH
Press this button to enter the search mode.
7. SLOW
Under playback mode, press SLOW for a slow playback.
8. ZOOM
Enlarge the picture of the selected channel (2x digital zoom).
9. / -
Press to show the 4-channel display mode.
Press – to change the setting in the menu.
10. SEG / +
Press SEQ to activate the call monitor function. Press SEQ again to escape this mode.
Press + to change the settings in the menu.
11. POWER
Turn the DVR4MQAE on or off with this button. In the recording mode, stop the recording before switching off the
device.
12. CH1, CH2 , CH3, CH4
Press one of these buttons to select the channel.
13. REC
Activation of the manual recording.
14. PLAY
Playback of the last recorded files.
15. ▲ / , ▼/ ■, ◄/ , ►/
Press ▲▼◄►to move the cursor up, down, left or right.
Under playback mode: press to pause the playback, press ■ to stop the playback, press
to fast rewind and
press to fast forward.
16. AUDIO SLOW / ZOOM
Press these two buttons simultaneously to select live or playback sounds of the 4 audio channels.
Hold SLOW pressed and press ZOOM to select the channel (1-4)
17. PTZ CONTROL Buttons
Press these two buttons simultaneously to enter or exit the PTZ control mode.